Rubin Shrestha
Rubin Shrestha
Blog

How to adjust drift_time for a Thinkpad Trackpoint on Debian

by |Published

I’m having issues with the Trackpoint on my Thinkpad T14. When I’m using the Trackpoint, it often happens that it recalibrates while I’m using it, leading to movement of the cursor in the opposite direction when I actually release the Trackpoint. This effect is far but new; in fact, a drift_time sysfs setting was submitted and added to kernel 3.19 (psmouse module) about 10 years ago. This is also what can be found when searching online for a solution to the problem. However, this setting just doesn’t exist on my system:

$ ls -alh /sys/devices/platform/i8042/serio1
total 0
drwxr-xr-x 5 root root    0  5. Feb 10:04 .
drwxr-xr-x 5 root root    0  5. Feb 10:04 ..
-rw-r--r-- 1 root root 4.0K  5. Feb 18:14 bind_mode
-r--r--r-- 1 root root 4.0K  5. Feb 10:54 description
lrwxrwxrwx 1 root root    0  5. Feb 10:05 driver -> ../../../../bus/serio/drivers/psmouse
--w------- 1 root root 4.0K  5. Feb 18:14 drvctl
-r--r--r-- 1 root root 4.0K  5. Feb 18:14 firmware_id
drwxr-xr-x 2 root root    0  5. Feb 10:05 id
drwxr-xr-x 3 root root    0  5. Feb 10:04 input
-r--r--r-- 1 root root 4.0K  5. Feb 18:14 modalias
drwxr-xr-x 2 root root    0  5. Feb 18:10 power
-rw-r--r-- 1 root root 4.0K  5. Feb 18:14 press_to_select
-rw-r--r-- 1 root root 4.0K  5. Feb 18:14 protocol
-rw-r--r-- 1 root root 4.0K  5. Feb 18:14 rate
-rw-r--r-- 1 root root 4.0K  5. Feb 18:17 resetafter
-rw-r--r-- 1 root root 4.0K  5. Feb 18:14 resolution
-rw-r--r-- 1 root root 4.0K  5. Feb 18:14 resync_time
-rw-r--r-- 1 root root 4.0K  5. Feb 18:14 sensitivity
lrwxrwxrwx 1 root root    0  5. Feb 10:04 subsystem -> ../../../../bus/serio
-rw-r--r-- 1 root root 4.0K  5. Feb 10:04 uevent

$ find /sys -name '*drift*'
# Nothing

The Trackpoint otherwise works as designed, including middle-clicking and scrolling. My questions:

  • Do I need to install another module or software package?
  • Do I need to add parameters to the kernel to make this work?
  • Was this configuration interface redesigned and the setting is now somewhere else? (note that I tried resetafter and resync_time already, to no avail)
  • Something else?

Some info about my system:

$ uname -a
Linux xxxxxx 6.12.9+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1~bpo12+1 (2025-01-19) x86_64 GNU/Linux

$ cat /sys/devices/platform/i8042/serio1/input/input5/name 
TPPS/2 Elan TrackPoint

You may also like