I have a Raspberry Pi with a Hifiberry Amp4 that runs Moode Audio OS. If I pick Pulse as they audio device in LedFx and play a sound file with aplay sound_file.wav my leds react to the music. The problem is that after aplay has finished playing the sound file […]
Rubin
9171 posts
My home network is behind CGNAT, I don’t get any public IP address. I want to access my home network via Wireguard from mobile clients. Home Router <----Wireguard----> VPS (Tunnel "A") Home Router <----Wireguard-----(VPS)----> Mobile Client (Tunnel "B") Home Router and VPS has OPNSense installed. Tunnel “A” is already up […]
I use adblock. Somesites will bounce through a few servers to see if I’m logged in and do some prep. Sadly it is very hard to ‘allow’ the sites. IE I go to a site, there is a green hand (allowed domain) I click login and it flashes a red […]
I have been having intermittent spikes in response time with HTTP(S) traffic on WiFi that last varying amounts of time. (Or at the very least HTTP(S) traffic, I do not notice it with Spotify for example.) This has only been happening since I moved from Debian 11 to Debian 12, […]
I installed PiHole a few months ago. Under normal operation, everything’s running fine but I’ve noticed that when my home internet goes down (power outage, plumber cuts a cable, etc) then my internet will continue to appear down even after it’s restored and will continue to behave as if it’s […]
I’m seeking assistance with a networking setup using my ZTE F6600 router. Here’s the scenario: Setup: Main Router: ZTE F6600 (provided by ISP) Devices: Linux server connected to the main router Requirement: I want to share internet access with a family in the same building. To achieve this, I plan […]
I just set up a small home server and when I looked at its total disk space it said 100G. So I took a quick look into lsblk and this was the output: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 63.9M 1 loop /snap/core20/2105 loop1 7:1 0 […]
I took out my gpu so i can test another one and when I wanted to put it back I just heard some beeping noises there is one pin shorter than the others but the back has all the pins alined.
I would like to open port 80 and 443 to my IIS webserver. I have forwarded both ports to my PC running IIS. I have proved that by running a port monitor that shows the ports are going to the correct PC. I have tested port 80 remotely with Remote […]